ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-03-2014   #10
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,193
Default Re: 1991 ZR1 ODB1 Port Location

Quote:
Originally Posted by roadczar View Post
~56,000. If I will be going through the trouble of pulling of the intake
I might as well also do the rest as suggested?

- Fuel injectors
- Coil packs
- spark plugs/wires
- Fuel pumps

Anything else? Would like to remove as much emmissions related mess as I can (really don't want to pull the heads)
If you're going to bulk replace parts might as well hit the O2 sensors.
If it were me I'd clear the codes then go for a drive until a code sets then dump the codes and find out what's wrong and go at the codes in the order the come out. The exception would be injectors if they are OEM. They need to come out as was mentioned.
__________________
Scott


Vett owner since 1979._It's about the car and the people
scottfab is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025