Broght my new Z home today! - ZR-1 Net Registry Forums

mike100 · 04-18-2014

there's nothing to 'read' data-stream-wise on the fx3 shocks. Even the factory scanner just ground the appropriate pin for the shock controller which will spit out the codes via the flashing light in the dash. There are only a handful of codes for the shock controller anyhow. It is useful to find out which corner you have the problem on more than anything else.

you can just do the paperclip shorting method for now without having to buy anything. I forget which terminal, but it should be well documented online somewhere (or if you have the FSM).

04-18-2014	#31
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,786	Re: Broght my new Z home today! there's nothing to 'read' data-stream-wise on the fx3 shocks. Even the factory scanner just ground the appropriate pin for the shock controller which will spit out the codes via the flashing light in the dash. There are only a handful of codes for the shock controller anyhow. It is useful to find out which corner you have the problem on more than anything else. you can just do the paperclip shorting method for now without having to buy anything. I forget which terminal, but it should be well documented online somewhere (or if you have the FSM).