ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 06-27-2014   #1
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
Default Re: Bypassing the clutch switch

What is the input and function of the starter enable in the Central Control Module (90-92)?
The CCM function activates the Starter Enable Relay (90-92)?

Then we have the higher current load passing through the Clutch Start Switch (90-92) which we reduce that current load using an additional Relay which provides a much shorter and unencumbered path between the Battery and Starter Solenoid.

On the 90-92 we eliminate the ignition switch path between the battery and Starter Solenoid as well using the New Relay.
If we installed the New Relay on the 93-95 we would be using direct current between Battery and Starter Solenoid not relying on current passing through the Ignition Switch (in that regard the same benefit as on a 90-92).

Last edited by Dynomite; 06-27-2014 at 08:40 AM.
Dynomite is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025