Electric fan removal

[Domestic Power]

Rookie help here, but my 1990 FSM says
1. remove battery cable
2. remove bolt (upper right )retaining fan assembly to fan shroud.
3. Raise vehicle and suitably support.
4. remove electrical connector from fan motor.
5. remove bolts retaining fan assembly to fan shroud.
6. remove fan assembly from vehicle.
I am assuming because of step #3, the fan will be removed from below, after a quick trip to look at mine ( without the car raised ) it looks like that makes sense. Hope this helps !

[LantanaTX]

Originally Posted by Domestic Power

Rookie help here, but my 1990 FSM says
1. remove battery cable
2. remove bolt (upper right )retaining fan assembly to fan shroud.
3. Raise vehicle and suitably support.
4. remove electrical connector from fan motor.
5. remove bolts retaining fan assembly to fan shroud.
6. remove fan assembly from vehicle.
I am assuming because of step #3, the fan will be removed from below, after a quick trip to look at mine ( without the car raised ) it looks like that makes sense. Hope this helps !

Thank you, I have the same instructions. Only problem is.. after you complete step 5, there is no way step 6 is going to happen, and I was trying to remove from the bottom.