WANTED-1991 Rear Bumper Moldings - ZR-1 Net Registry Forums

rptech · 03-25-2015

I need the right side, or will buy both sides if I have to. I am in a real pickle right now...need them ASAP. Will look at ones that need work as well. As you can see in the picture, she is looking really naked right now!

rptech · 03-25-2015

Looks like I need both sides. Only the hockey stick shaped pieces. I have the straight sides already.

GOLDCYLON · 03-26-2015

talk to Brett here at Blue flame restorations belieive he remade this enitre set of moldings. Heres an old post so you can PM him

http://www.zr1.net/forum/showthread....=rear+moldings

rptech · 03-26-2015

We tried a set of those. He had some issues with them. As far as I know he has not had success with them yet.

GOLDCYLON · 03-26-2015

Quote:

Originally Posted by rptech

We tried a set of those. He had some issues with them. As far as I know he has not had success with them yet.

Well I did not know that. Good luck with your search. Normally these only come up on a Part out. The NOS ones normally are long gone unless somebody is holding onto a set.

Blue Flame Restorations · 03-26-2015

There's a full set on Ebay.

My issue was the material that I used. It wasn't rigid enough and the part warped as a result. Easily remedied. I just haven't ordered a different material, which is available. I have sold others that are just fine, once bolted in place, they can't change shape.

GOLDCYLON · 03-26-2015

http://www.ebay.com/itm/C4-CORVETTE-...b1d038&vxp=mtr

rptech · 03-27-2015

Quote:

Originally Posted by Blue Flame Restorations

There's a full set on Ebay.

My issue was the material that I used. It wasn't rigid enough and the part warped as a result. Easily remedied. I just haven't ordered a different material, which is available. I have sold others that are just fine, once bolted in place, they can't change shape.

Brett,
just want to make it clear that I was more than pleased with your efforts and superb customer service. I feel like the wording of my previous post left the opportunity to interpret my post in such a way that I may have been unhappy with you. Not at all the case.
Our problem was that the painter left the parts sitting for at least several weeks before getting around to them. In that time, they severely distorted. I agree that they would likely have been fine if immediately installed. Moving to a different material would surely solve this. Believe me, as design engineer, and owner of a rapid prototype company, I fully appreciate the iterative steps involved with developing a new part. Your efforts are more than appreciated on my end!
Scott

03-25-2015	#2
rptech Join Date: Apr 2013 Location: Ortonville, Michigan Posts: 23	Re: WANTED-1991 Rear Bumper Moldings Looks like I need both sides. Only the hockey stick shaped pieces. I have the straight sides already.

03-26-2015	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,119	Re: WANTED-1991 Rear Bumper Moldings talk to Brett here at Blue flame restorations belieive he remade this enitre set of moldings. Heres an old post so you can PM him http://www.zr1.net/forum/showthread....=rear+moldings __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 03-26-2015 at 08:57 AM.

03-26-2015	#4
rptech Join Date: Apr 2013 Location: Ortonville, Michigan Posts: 23	Re: WANTED-1991 Rear Bumper Moldings We tried a set of those. He had some issues with them. As far as I know he has not had success with them yet.

03-26-2015	#6
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,899	Re: WANTED-1991 Rear Bumper Moldings There's a full set on Ebay. My issue was the material that I used. It wasn't rigid enough and the part warped as a result. Easily remedied. I just haven't ordered a different material, which is available. I have sold others that are just fine, once bolted in place, they can't change shape. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

03-26-2015	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,119	Re: WANTED-1991 Rear Bumper Moldings http://www.ebay.com/itm/C4-CORVETTE-...b1d038&vxp=mtr __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V