My car has every Selective Ride Control fault code

[RussMcB]

Glad to hear about the progress. Resetting the codes was a challenge for me, too.

Originally Posted by JohnnyRockit

<snip> I pulled the actuator off and it did move back and forth when the ignition was turned on.

Did you have someone helping you to do this?

Reason for asking: I was alone and tried the following: Disconnect battery negative battery cable, turn ignition on, position myself near the left front shock so I could monitor the actuator, reconnect battery cable.

Later I read that I should NEVER do that (connect battery cable while ignition is on) because it can ruin the ECU.

I guess I was lucky and did no damage.