![]() |
#11 |
![]() Join Date: Jan 2010
Location: Mystic CT
Posts: 2,632
|
![]()
Wirecutters? Snip it off even with the fender...
![]() |
![]() |
![]() |
![]() |
#12 |
![]() Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
![]()
http://www.parts123.com/corvettecent...050f&ukey=8564
This is what I have. Mounted the switch inside console. |
![]() |
![]() |
![]() |
#13 | |
![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
![]() Quote:
Wow I did this in 2008!!!! http://www.zr1.net/forum/showthread....hlight=antenna
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 07-06-2015 at 04:10 PM. |
|
![]() |
![]() |
![]() |
#14 | |
![]() Join Date: May 2011
Location: Sydney, Australia
Posts: 2,466
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#15 | |
![]() Join Date: May 2011
Location: Sydney, Australia
Posts: 2,466
|
![]() Quote:
Here is what I used. Two of them will fit inside the center consul by the rear glass release. I will get you a photo on Wednedsay when I get home if you are interested. http://www.amazon.com/HOT-SYSTEM-Roc...=rocker+switch |
|
![]() |
![]() |
![]() |
#16 | |
![]() Join Date: May 2010
Location: Japan
Posts: 3,109
|
![]() Quote:
Thanks, I'm interested. I hate how the car looks with the CB antenna up. ![]()
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
|
![]() |
![]() |
![]() |
#17 |
Join Date: Jun 2013
Location: Toronto
Posts: 780
|
![]()
Didn't want to chime in and offend anyone but hey what the heck its just my opinion eh? I HATE the look of the oem antenna. First mod I did for both my c4s. lie under the back bumper behind the drivers rear tire.. .. using a test light with ignition on I found the power wire and snip. taped it up and done. Antenna all the way down, painted flat black and done. To me, the antenna looks awful and dates the car badly (along with the steering wheel and shift knob and stereo head unit) . It goes up crooked. If the leaning tower of Pisa looks straight to you then I think the antenna should be left alone
![]() ![]() |
![]() |
![]() |
![]() |
#18 | |
![]() Join Date: May 2010
Location: Japan
Posts: 3,109
|
![]() Quote:
![]() In the bag in the storage room......... Bought a plug to cap the top ![]()
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
|
![]() |
![]() |
![]() |
#19 | |
Join Date: Jun 2013
Location: Toronto
Posts: 780
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#20 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,109
|
![]()
I upgraded the stereo in my 90 (why, I can barely hear it with the B&Bs anyway), but never listen to radio and was doing weight reduction back in those days. In my 95 I'm trying (trying) to keep it complete.
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
|
|