Have your Climate Control Buttons ever not respond to your commands??? - ZR-1 Net Registry Forums

Roadster · 07-19-2015

Took the Z to work on Thursday and noticed on the way home that I was not getting any response from the Climate control Buttons. Thankfully the AC was on, at least it was a cool ride home... Could not even shut the system off.
So I got home and did a search and this is what I found on you tube....
Climate Control Repair- C4 Corvette (can't get the link to copy, but here is the title.) So he has the same problem on a 93 and proceeds to show how it may be possible to get the panel to respond once again, by taking it apart and cleaning the contacts, etc.
Let me tell you, his process worked great, my panel responds instantly with any command, what a pleasure to know the system is once again 100%.
Here are some pics of what I did, I also found that behind the center top vent that the foam was hanging, therefore impeding my air flow, used super glue to reattach and you should feel the flow now......
Forgot to take an actual pic of the Climate Control inner board removed where you clean the contacts, but you will see that in the video I referenced too.
Also replace the Bose while everything was apart, with the unit I bought about a month ago. Plays excellent and now the CD system works perfect. Will get my original Bose repaired some day.
The antenna making a buzzing noise as it reaches the top of its travel, and does not go down completely when turning the radio off. (up about 3").
But that is for another day.

Pic #1.....the Climate Control

Pic #2.....using the needle nose
On one bolt, had to use the needle nose to carefully remove the bolt, as the bracket is in the way and I couldn't find a thin wall socket to do the job. It worked great to undo and to reattach.

Pic #3....exposing the board, again this is not the inner board where you clean the contacts...dummy me!!!

Pic #4....pencil erasers to clean the contacts
You can see the difference between a clean eraser and one that has been over the contacts....

Pic #5....q-tips used
here you can see the q-tips that were used to clean the contacts with alcohol after using the pencil eraser. I went around the board at least 3 times with the eraser and alcohol to make sure everything was as clean as could be. Also cleaned the pins. You will notice the dirt on the q-tips, they were dipped in alcohol to do the job. The video shows removing the ribbon from the board, but I did not see a need to do that, so I left it in tact.

Roadster · 07-19-2015

Pic #6....foam displaced in top air vent

Pic #7....radio and Climate Control out
what a dusty mess in there....cleaned everything up, looking clean...

Pic #8....installation of units (newly purchased Bose) and foam glued

Pic#9....job complete and everything working just fine

RussMcB · 07-19-2015

Thank you, Tom. I think I need to do that. Mine were acting funky recently.

Roadster · 07-19-2015

Quote:

Originally Posted by RussMcB

Thank you, Tom. I think I need to do that. Mine were acting funky recently.

My pleasure Russ, glad it will get you motivated to get it done

....it's too hot not to have the system working correctly....

lbszr · 07-20-2015

Interesting. Mine has done that also. If I leave it alone for a while. It seems to wake up and work, so I thought it was some type of processing problem, but I might have to try this.

Roadster · 07-21-2015

Quote:

Originally Posted by lbszr

Interesting. Mine has done that also. If I leave it alone for a while. It seems to wake up and work, so I thought it was some type of processing problem, but I might have to try this.

Yes, mine also was a work and not work problem. Then it just stopped responding. Worth the time to do, just watch the video. Hopefully it will work for you, it acts like a new system....

GOLDCYLON · 07-21-2015

Is there a link to the video? Im not sure which parts you are cleaning from the pics?

Roadster · 07-22-2015

Finally figured out how to post the link. As I mentioned above, dummy me forgot to take the pic of the control unit with all the buttons apart. As you will see in the video, very easy to do....The only pic is #3, where the control "head" on the right is shown from the back. The large board on the left was just inspected, I did not do anything with it. Again I felt no need to unplug the ribbon.

Climate control repair C4 Corvette
https://www.youtube.com/watch?v=KBeqA1n9q9A

GOLDCYLON · 07-22-2015

Quote:

Originally Posted by Roadster

Finally figured out how to post the link. As I mentioned above, dummy me forgot to take the pic of the control unit with all the buttons apart. As you will see in the video, very easy to do....The only pic is #3, where the control "head" on the right is shown from the back. The large board on the left was just inspected, I did not do anything with it. Again I felt no need to unplug the ribbon.

Climate control repair C4 Corvette
https://www.youtube.com/watch?v=KBeqA1n9q9A

Thanks Tom that cleans up the mystery so to speak.

John Boothby · 07-22-2015

Mine was iffy when I bought the car 10 years ago and I had read in this forum about cleaning the contacts. I took mine apart and cleaned the contacts and it has worked flawlesly ever since. Easy job also! Also Dr. Don did his number on my radio/cd/cassett and speakers. Also replace the power antenna with a complete new unit.

07-22-2015	#10
John Boothby Join Date: Jul 2005 Location: Las Vegas, Nevada Posts: 775	Re: Have your Climate Control Buttons ever not respond to your commands??? Mine was iffy when I bought the car 10 years ago and I had read in this forum about cleaning the contacts. I took mine apart and cleaned the contacts and it has worked flawlesly ever since. Easy job also! Also Dr. Don did his number on my radio/cd/cassett and speakers. Also replace the power antenna with a complete new unit.

07-19-2015	#1
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,915	Have your Climate Control Buttons ever not respond to your commands??? Took the Z to work on Thursday and noticed on the way home that I was not getting any response from the Climate control Buttons. Thankfully the AC was on, at least it was a cool ride home... Could not even shut the system off. So I got home and did a search and this is what I found on you tube.... Climate Control Repair- C4 Corvette (can't get the link to copy, but here is the title.) So he has the same problem on a 93 and proceeds to show how it may be possible to get the panel to respond once again, by taking it apart and cleaning the contacts, etc. Let me tell you, his process worked great, my panel responds instantly with any command, what a pleasure to know the system is once again 100%. Here are some pics of what I did, I also found that behind the center top vent that the foam was hanging, therefore impeding my air flow, used super glue to reattach and you should feel the flow now...... Forgot to take an actual pic of the Climate Control inner board removed where you clean the contacts, but you will see that in the video I referenced too. Also replace the Bose while everything was apart, with the unit I bought about a month ago. Plays excellent and now the CD system works perfect. Will get my original Bose repaired some day. The antenna making a buzzing noise as it reaches the top of its travel, and does not go down completely when turning the radio off. (up about 3"). But that is for another day. Pic #1.....the Climate Control Pic #2.....using the needle nose On one bolt, had to use the needle nose to carefully remove the bolt, as the bracket is in the way and I couldn't find a thin wall socket to do the job. It worked great to undo and to reattach. Pic #3....exposing the board, again this is not the inner board where you clean the contacts...dummy me!!! Pic #4....pencil erasers to clean the contacts You can see the difference between a clean eraser and one that has been over the contacts.... Pic #5....q-tips used here you can see the q-tips that were used to clean the contacts with alcohol after using the pencil eraser. I went around the board at least 3 times with the eraser and alcohol to make sure everything was as clean as could be. Also cleaned the pins. You will notice the dirt on the q-tips, they were dipped in alcohol to do the job. The video shows removing the ribbon from the board, but I did not see a need to do that, so I left it in tact. __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member Last edited by Roadster; 07-21-2015 at 01:59 PM.

07-19-2015	#3
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,148	Re: Have your Climate Control Buttons ever not respond to your commands??? Thank you, Tom. I think I need to do that. Mine were acting funky recently.

07-20-2015	#5
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 424	Re: Have your Climate Control Buttons ever not respond to your commands??? Interesting. Mine has done that also. If I leave it alone for a while. It seems to wake up and work, so I thought it was some type of processing problem, but I might have to try this.

07-21-2015	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Have your Climate Control Buttons ever not respond to your commands??? Is there a link to the video? Im not sure which parts you are cleaning from the pics? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V