Motor Mount Replacement - ZR-1 Net Registry Forums

KJL · 11-11-2016

Because of the heat shields, it is very difficult to tell what condition they are in. That said, they are 27 years old and figured I would just replace them before they are no longer available. How is this done? I already have the car up in the air on jack stands fixing a bunch of other stuff and have the exhaust removed from the headers and the c-beam and propeller shaft are also removed.

5ABI VT · 11-11-2016

Interested to know as well. Does anyone make solid mounts ?

Jagdpanzer · 11-11-2016

GM part #10157980

A26B · 11-15-2016

Here's a link with the procedure for replacing the Motor Mounts.
http://www.jerrysgaskets.com/mount-motor-used-90-95-3c/

See description for Mtr Mount at that link.

Sent from my iPhone using ZR-1 Net Registry

KJL · 11-15-2016

Thanks for the input, I was hoping the headers would not have to be removed. From what I can tell they look to be in good shape. No signs of leakage. I think I will leave them be for now.

11-11-2016	#2
5ABI VT Join Date: Jun 2013 Location: Toronto Posts: 780	Re: Motor Mount Replacement Interested to know as well. Does anyone make solid mounts ?

11-11-2016	#3
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,651	Re: Motor Mount Replacement GM part #10157980 __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

11-15-2016	#4
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,404	Motor Mount Replacement Here's a link with the procedure for replacing the Motor Mounts. http://www.jerrysgaskets.com/mount-motor-used-90-95-3c/ See description for Mtr Mount at that link. Sent from my iPhone using ZR-1 Net Registry __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 11-15-2016 at 06:40 PM.*

11-15-2016	#5
KJL Join Date: Mar 2013 Location: Roswell, GA Posts: 234	Re: Motor Mount Replacement Thanks for the input, I was hoping the headers would not have to be removed. From what I can tell they look to be in good shape. No signs of leakage. I think I will leave them be for now. __________________ 1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp

11-11-2016	#1
KJL Join Date: Mar 2013 Location: Roswell, GA Posts: 234	Motor Mount Replacement Because of the heat shields, it is very difficult to tell what condition they are in. That said, they are 27 years old and figured I would just replace them before they are no longer available. How is this done? I already have the car up in the air on jack stands fixing a bunch of other stuff and have the exhaust removed from the headers and the c-beam and propeller shaft are also removed. __________________ 1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp