Radiator suggestions please for my 91

[Dynomite]

Originally Posted by Jagdpanzer

One day left to get in on the Dewitt annual 15% off sale. http://www.corvetteforum.com/forums/...post1593940565
Go with their 1129090m single row.
Around $300 with the discount

I would go with what Phil is suggesting or a like Aluminum Radiator (I would also go with the Double Row)........The Zs do better with an Aluminum Radiator and the Double row.

I have Ron Davis (expensive but the best) and Fluidyne in all Zs. Also run with 180 deg Thermostats in all Zs except 195 deg Thermostat in L98s. I think I also have a Dewitt in one Z which was previously installed.

C4 Corvette Aluminum Radiators

Originally Posted by billschroeder5842

I need something reasonable and solid. While money is not a huge factor.
Thanks!

A good quality Aluminum Radiator in the Z is the last thing I would scrimp on. And since you have the radiator out as well as the Fans.....replace ALL Coolant Hoses with new screw Clamps (use the rounded edge screw Clamps for Silicon Hoses or all Coolant Hoses).

Install all Screw Clamps such that the screws/nuts are accessible after installation of the fans and Radiator. I use a bit of Permatex on ALL Radiator Hoses/Fittings