Carlisle August 24-27, 2017 Who is IN?

[WVZR-1]

Page 40 of this Carlisle Document for ZR-1 Registry assigned locations, page 41 is better map representation

http://www.carlisleevents.com/carlis...s-Carlisle.pdf

[DRM500RUBYZR-1]

I have always dutifully entered the Fun-field through Gate 3 for many years.
Must we enter via Gate 3, or do you know if we can enter via Gate 5?
Three requires driving all the way into town, around and back up to 3.
Five looks like you turn right off of route 11 somewhere and head towards the gate.
Don't want to try it and get turned away, and have to double back.
Thanks for your thoughts / experience.

Marty

[Roadster]

Originally Posted by DRM500RUBYZR-1

I have always dutifully entered the Fun-field through Gate 3 for many years.
Must we enter via Gate 3, or do you know if we can enter via Gate 5?
Three requires driving all the way into town, around and back up to 3.
Five looks like you turn right off of route 11 somewhere and head towards the gate.
Don't want to try it and get turned away, and have to double back.
Thanks for your thoughts / experience.

Marty

Marty, I won't have to worry about using any gates. I just hired a helicopter service that will airdrop the Z right onto the flied.....lol

There is a back way as you mentioned, but I can't remember it....must be the age.....
Anyway, how many are going on Thursday and going right to the Fairgrounds in the AM? I intend to get an early start, even though there will be traffic on the pike westbound, but once you get past 476 and then past Valley Forge, it should be fine!!!
I just filled up the Z and am ready. I will also have my Tech 1 with me, so if anyone has an interest in checking out the parameters on your LT5, just let me know. I do have the Master Cartridge installed for all of the ZR-1 years, at least that what the cartridge has on it.....lol
Safe travels everyone, looking forward to next week!!!

[Mystic ZR-1]

There's a back way into the fairgrounds on Calvary Rd.
Not sure if it's gate 5 or even open all the time? But,
I have come in that way before. Part of it's a dirt road.
Comes in on top of the hill.
Gate 3 works fine if ya get there early.
Use google maps to find your way around the usual traffic.

[DRM500RUBYZR-1]

Originally Posted by Roadster

Marty, I won't have to worry about using any gates. I just hired a helicopter service that will airdrop the Z right onto the flied.....lol

There is a back way as you mentioned, but I can't remember it....must be the age.....
Anyway, how many are going on Thursday and going right to the Fairgrounds in the AM? I intend to get an early start, even though there will be traffic on the pike westbound, but once you get past 476 and then past Valley Forge, it should be fine!!!
I just filled up the Z and am ready. I will also have my Tech 1 with me, so if anyone has an interest in checking out the parameters on your LT5, just let me know. I do have the Master Cartridge installed for all of the ZR-1 years, at least that what the cartridge has on it.....lol
Safe travels everyone, looking forward to next week!!!

Tom (and others),
What time are you planning on departing on Thursday?
I was contemplating pulling out of NJ at around 6:00 A.M.
commodore barry blue route sure kill xpwy to pa pike.
Perhaps we could meet at the first rest stop past Valley Forge?
Let me know, I could follow you and risk getting dag on my windshield.....
Marty