Intake gasket sets? - ZR-1 Net Registry Forums

Dynomite · 03-19-2018

I have Throttle Body Coolant blocked at Injector Housings and do not use anything on 1/32 Plenum Gaskets.

Set Plenum in Place making ALL electrical and vacuum connections and then slide gaskets in place (lift Plenum just enough to slide gaskets in place).

I tighten Plenum SS Allen Head Bolts tight but not too tight and then check them once in a while (less than what book calls for as I have no coolant to TB)

Sent from my iPhone using ZR-1 Net Registry

03-19-2018	#9
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,816	Intake gasket sets? I have Throttle Body Coolant blocked at Injector Housings and do not use anything on 1/32 Plenum Gaskets. Set Plenum in Place making ALL electrical and vacuum connections and then slide gaskets in place (lift Plenum just enough to slide gaskets in place). I tighten Plenum SS Allen Head Bolts tight but not too tight and then check them once in a while (less than what book calls for as I have no coolant to TB) Sent from my iPhone using ZR-1 Net Registry __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 03-19-2018 at 03:19 PM.