91 415 & 93 385 Z's - Page 2 - ZR-1 Net Registry Forums

WB9MCW · 10-01-2005

Very SWEEEEEEEEEEEEET Z's there Mr. FU2

FU · 10-03-2005

Quote:

Originally Posted by Z Factor

Is your high rise hood made of carbon fiber? If so, what is it's weight?

For safety reasons the hood is made out of fiberglass. CF could be real tough on the neck.....The Toledo Pro high rise hood is a bit lighter than the stock. Exactly how much less the hood weighs is not known.

A1990 · 10-08-2005

Quote:

Originally Posted by FU2

Hey Dennis

That is a actually a picture of John Lingenfelter test driving the green LPE/LSV at Indianapolis.

Frank!

That picture is historic then!!

WB9MCW · 10-08-2005

FU2 was it at the gathering in 96 that JL and DM signed the plentium? Why is not ur plentium the LDE style/type? I would have to agree with a1990 that the pic is historic of ur green 93 LPE/LSV with JL doin da burnout 4 sure!!!

FU · 10-11-2005

You could possibly be correct about the signature date being at the gathering in 96 Bryan. The dates that are on the plenum signatures will back that statement up.
Larry Merrow didn't have any of his LPE engines identified by having the LPE engraving done. Guess that it was his own preference to not have the plenums etched. But all of his cars do have a full set of signatures on them. His first car (a 91 368) I believe......has Zoras signature on the plenum. The signature is right down the middle of the plenum . Now that is the plenum to have.

cuisinartvette · 10-18-2005

Lookin good, FU! That white Z is a rare bird for sure!

95ZR1#418 · 10-25-2005

Quote:

Originally Posted by FU2

Hey Dennis

That is a actually a picture of John Lingenfelter test driving the green LPE/LSV at Indianapolis.

Nice to have a pic like that.

HIZNHRZ · 12-29-2007

So just what does a completely assembled 440 cubic inch engine look like?

WB9MCW · 12-30-2007

Maybe you ment the LPE 415 stroker???

If so well here ya go!!!

And this one is a 427 CID---

10-01-2005	#11
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,584	Re: 91 415 & 93 385 Z's Very SWEEEEEEEEEEEEET Z's there Mr. FU2

10-08-2005	#14
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,584	Re: 91 415 & 93 385 Z's FU2 was it at the gathering in 96 that JL and DM signed the plentium? Why is not ur plentium the LDE style/type? I would have to agree with a1990 that the pic is historic of ur green 93 LPE/LSV with JL doin da burnout 4 sure!!!

10-11-2005	#15
FU Join Date: Mar 2004 Location: Found Member Posts: 4,327	Re: 91 415 & 93 385 Z's You could possibly be correct about the signature date being at the gathering in 96 Bryan. The dates that are on the plenum signatures will back that statement up. Larry Merrow didn't have any of his LPE engines identified by having the LPE engraving done. Guess that it was his own preference to not have the plenums etched. But all of his cars do have a full set of signatures on them. His first car (a 91 368) I believe......has Zoras signature on the plenum. The signature is right down the middle of the plenum . Now that is the plenum to have.

10-18-2005	#16
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: 91 415 & 93 385 Z's Lookin good, FU! That white Z is a rare bird for sure!

12-29-2007	#18
HIZNHRZ Join Date: Apr 2004 Location: Germantown, MD Posts: 732	Re: 91 415 & 93 385 Z's So just what does a completely assembled 440 cubic inch engine look like?

12-30-2007	#19
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,584	Re: 91 415 & 93 385 Z's Maybe you ment the LPE 415 stroker??? If so well here ya go!!! And this one is a 427 CID--- Last edited by WB9MCW; 12-30-2007 at 12:22 AM.