Coolant Temp sensor - ZR-1 Net Registry Forums

onetinsoldier · 06-29-2018

I am looking for a part number for a coolant temp sensor for a 91 ZR1 . I am not sure if the part is car specific and there a lot of them out there . I prefer a GM part .

Reason being I have had issues in the past with some non GM parts in other corvettes not reading correctly and causing problems during reprogramming.

HAWAIIZR-1 · 06-29-2018

IMG_9980.JPG

A good source is Jerry’s gaskets. It depends on which sensor.

http://www.jerrysgaskets.com/search....erature+sensor

Sent from my iPhone using ZR-1 Net Registry

Ccmano · 06-29-2018

There are 2 that mount inside the left Injector Housing. One is for the gages the other is for the ECM. The original AC/Delco part numbers were 213-310 for the gages and 213-80 for the ecm.
H

onetinsoldier · 06-30-2018

Thankyou !

06-29-2018	#1
onetinsoldier Join Date: Aug 2016 Location: Spring Hill, FL Posts: 127	Coolant Temp sensor I am looking for a part number for a coolant temp sensor for a 91 ZR1 . I am not sure if the part is car specific and there a lot of them out there . I prefer a GM part . Reason being I have had issues in the past with some non GM parts in other corvettes not reading correctly and causing problems during reprogramming.

06-29-2018	#2
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,108	Coolant Temp sensor IMG_9980.JPG A good source is Jerry’s gaskets. It depends on which sensor. http://www.jerrysgaskets.com/search....erature+sensor Sent from my iPhone using ZR-1 Net Registry __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 Last edited by HAWAIIZR-1; 06-29-2018 at 05:50 PM.

06-29-2018	#3
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,843	Re: Coolant Temp sensor There are 2 that mount inside the left Injector Housing. One is for the gages the other is for the ECM. The original AC/Delco part numbers were 213-310 for the gages and 213-80 for the ecm. H

06-30-2018	#4
onetinsoldier Join Date: Aug 2016 Location: Spring Hill, FL Posts: 127	Re: Coolant Temp sensor Thankyou ! Last edited by onetinsoldier; 06-30-2018 at 08:23 PM.