|
04-04-2019
|
#1 |
 
Join Date: Mar 2018
Location: Norway
Posts: 345
|
C6 ZR1 wheels on a C4 ZR-1
Anyone know what size wheels and tires I can put on my Z without getting any rubbing or clearance issues?
Would like to get some C6 ZR1 style wheels in staggered 18/19 inch or just 19 inch all around. All input is highly appreciated. Roy M.
__________________
Roy Martin 1994 ZR-1 #112 Admiral Blue/Black Dana 4:10 Aluminum flywheel Corsa exhaust Watson headers Haibeck chip 470 HP/399 RWHP 1991 ZR-1 #400 White/Red (SOLD) Dana 4:10 Powder coated engine Haibeck performance chip Borla exhaust |
|
|
|
04-04-2019
|
#2 |
|
Join Date: Jun 2018
Location: fishers,indiana
Posts: 76
|
Re: C6 ZR1 wheels on a C4 ZR-1
From what I have seen from looking for wheels right now the rears should fit with a spacer and the fronts clear no problems. You could prob find a bolt on spacer that would put the wheel in the correct offset for the z. Wanna say you will need like a 10mm spacer for the rear. Looks like 275/30/18 for fronts and 32/30/19 for rears should work.
|
|
|
|
|
04-04-2019
|
#3 |
|
Join Date: Sep 2016
Location: Atlanta
Posts: 93
|
Re: C6 ZR1 wheels on a C4 ZR-1
MMR sells the new ZR1 replicas in 18's....
seller on ebay says theyll do custom offsets ive been pondering that route https://www.ebay.com/itm/18-M755-Flo...53.m1438.l2649 |
|
|
|
|
04-09-2019
|
#4 |
|
Join Date: Mar 2018
Location: Norway
Posts: 345
|
Re: C6 ZR1 wheels on a C4 ZR-1
Consider getting these in 9,5 x 18 and 11 x 19 to get some rubber too, not just rims with a tape roll, which I don't like myself. What do you think? Will be black and I will add a red stripe on the edge when I get them. They will go on an Admiral Blue car if everything goes as planned.
https://www.mrrwheels.com/products/fs1
__________________
Roy Martin 1994 ZR-1 #112 Admiral Blue/Black Dana 4:10 Aluminum flywheel Corsa exhaust Watson headers Haibeck chip 470 HP/399 RWHP 1991 ZR-1 #400 White/Red (SOLD) Dana 4:10 Powder coated engine Haibeck performance chip Borla exhaust |
|
|
|
|
04-09-2019
|
#5 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: C6 ZR1 wheels on a C4 ZR-1
IIRC, Dominic (aka XfireZ51) has C6ZR1 wheels on his Z. He'd be one to ask any particulars re: those wheels.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
04-09-2019
|
#6 | |
|
Join Date: Sep 2016
Location: Atlanta
Posts: 93
|
Re: C6 ZR1 wheels on a C4 ZR-1
Quote:
are there pics anywhere ? ive contacted MMR directly about the offsets - no response yet i'd prefer 18/18s to maintain the look |
|
|
|
|
 |
|
|
Linear Mode
