Car actively trying to swap ends on track? - ZR-1 Net Registry Forums

RussMcB · 05-12-2019

It's definitely not a C4 thing.

My first thought is the rear toe has toe out, either static or dynamic (something is loose and allowing the toe to go "out").

You didn't mention an alignment. Hopefully you have a good one. If not, get one. If yes, tell us the settings. I grabbed something off the web a while back, with three good, general settings for street, high spirited driving, and race track. I'll find them and post here later.

My guess is your driving would not need to be radically different than the RX-8. In other words, if you're driving the RX-8 well, you should be able to drive the ZR-1 well, too.

05-12-2019	#2
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,148	Re: Car actively trying to swap ends on track? It's definitely not a C4 thing. My first thought is the rear toe has toe out, either static or dynamic (something is loose and allowing the toe to go "out"). You didn't mention an alignment. Hopefully you have a good one. If not, get one. If yes, tell us the settings. I grabbed something off the web a while back, with three good, general settings for street, high spirited driving, and race track. I'll find them and post here later. My guess is your driving would not need to be radically different than the RX-8. In other words, if you're driving the RX-8 well, you should be able to drive the ZR-1 well, too.