Shift Console Differences Between Years

[GOLDCYLON]

Originally Posted by secondchance

Shifter bezels are not ZR1 specific.
90 and 91, I believe, are the same. I think (not positive) 92 and 93 are same (same as 90-91 but in rubberized black). 94, 95 and 96 are the same in black rubberized finish and the right edge rolls down unlike 90 to 93.

They are NOT ZR-1 specific as stated above. 90 and 91 are the same 92-93 went to a black color vs grey and 94-96 was the model years that GM thought it would be a great idea to go with a black craptastic DULUSO rubberized coating that shows every scuff, Mark and scratch and Then melts and becomes sticky Goo if cleaned improperly over the years. GC

[We Gone]

Originally Posted by GOLDCYLON

They are NOT ZR-1 specific as stated above. 90 and 91 are the same 92-93 went to a black color vs grey and 94-96 was the model years that GM thought it would be a great idea to go with a black craptastic DULUSO rubberized coating that shows every scuff, Mark and scratch and Then melts and becomes sticky Goo if cleaned improperly over the years. GC

93 also has the crap coating, I just did a 93 and got the reproduction plate from one of the specialty shops, be aware the placement of the leather boot nut fasteners is not the same as the original.

Just one source.
https://www.corvettecentral.com/c4-8...6-speed-234327

[JThomas]

I would check with Mirrock Corvettes. They have been good in locating such parts.