Quote:
|
Originally Posted by Jerry#397
Jeff,
The problem I had with the "new" Jeal Headers I just installed was the location of the drivers side 02 probe, it hit the bell housing. Had to grind quite a bit to get it in and give about 1/16" clearance. And one other problem area for the Calif. guys is the location of the EGR tube, it would not allow me to put in the top bolt on the K brace on the passenger side; had to remove the header, install the K brace then reinstall the header. And I could not intall all the bolts on the passenger side front port although I have no leaks.
Jerry
|
new jeal headers?????? is someone making these now?
05-17-2008
Re: Stainless Works headers
Threaded Mode