|
09-25-2008
|
#1 |
|
Join Date: Sep 2008
Location: Toronto, Ontario
Posts: 7
|
Picture Request of ZR-1 w/ Samco Air Duct in Black
I searched Samco on the board and found lots of picture with ZR-1's that have the red duct/hoses. But, I want to see how it looks on the car in black. Does anyone have pictures of this they could post? If you do, could you put them on this this thread.
|
|
|
|
09-26-2008
|
#2 |
 Join Date: Sep 2006
Location: Olympia
Posts: 161
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
I have black on my Jeffvette powder coated red motor if that will give you an idea. Let me know and I will take a picture this weekend for you.
Similiar User Names!!!! Sure glad I the the 1 in mine. Doug |
|
|
|
|
09-26-2008
|
#3 |
|
Join Date: Sep 2008
Location: Toronto, Ontario
Posts: 7
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
Thanks. But I'd like to see it on the orignal silver paint. I have a custom lisence plate. "ZR FUN".
|
|
|
|
|
09-26-2008
|
#4 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,704
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
Intake duct:
 And coolant hoses: 
|
|
|
|
|
09-26-2008
|
#5 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
Poser!!!!
 Just kidding... it looks great Bob!!!! did not know you was running the Claw as well....
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
09-26-2008
|
#6 |
|
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,704
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
Yup, got the claw. Heheh, in that picture of the duct, you can see that huge amount of extra material over the airbox, and that's actually after some trimming. Then I trimmed it a little more and it's too short. Total waste of $150.
|
|
|
|
|
10-07-2008
|
#7 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,684
|
Re: Picture Request of ZR-1 w/ Samco Air Duct in Black
Bob,
Since you have the Claw, would you like to sell me your stock air filter housing/duct? On my new ZR-1 (Not a NEW ZR1) the filter housing is split at one of the seams. Jim |
|
|
|
 |
|
|
Linear Mode
