OZ Mito Modulars F/S - ZR-1 Net Registry Forums

limey · 11-19-2008

I have a set of 17" Mto Modulars for sale. 5 Spoke with the studs, these are what Callaway put on there ZR-1's, I had these on my 415 ZR-1 for about 2 years and have since changed back to the OEM wheels. Have been completley refinished inside and out & now are ready to bolt on and have fun.
Condition is near perfect, pictures will be posted up by Friday.

$1500.00 + shipping for the set. Can ship intl. but will only ship airfreight,no surface shipping.

This is a googled picture of the same style, but not the actual ones, just the same we are selling, use the picture to ref. what the style is.

8upZR1 · 11-19-2008

Are these 3 piece? Why did you go back to OEM? Any idea what kind of weiht difference there is between these and OEM?

-=Jeff=- · 11-19-2008

I really like these wheels.. Wish I was in a position to buy them

limey · 11-19-2008

Quote:

Originally Posted by 8upZR1

Are these 3 piece? Why did you go back to OEM? Any idea what kind of weiht difference there is between these and OEM?

These are the 3 piece, i took the wheels off the car to get re-finished and put on the OEM style, then never switched back. They have sat on the shelf for the past 4 years and never used since refinishing. I'll weigh a rear wheel and a stock rear wheel today and post up, i think though we'll find them to be dead on par with factory ones.

Aurora40 · 11-19-2008

Do they have the hidden perimeter bolts? Callaway had them made special I believe with hidden perimeter bolts, while the photo representation has the standard perimeter bolts.

Are they ZR-1 sizes and offsets?

GOLDCYLON · 11-19-2008

FS title by OP corrected due to misspelling. Good luck with the sale. GC

jonszr1 · 11-20-2008

i am interested . could post or pm actuall pics of these . are they zr1 offsets ?

GOLDCYLON · 11-20-2008

Quote:

Originally Posted by jonszr1

i am interested . could post or pm actuall pics of these . are they zr1 offsets ?

For the SNAT?

jonszr1 · 11-20-2008

yes sir , they would look very nice on that i think .

GOLDCYLON · 11-20-2008

No doubt, like it should.

11-19-2008	#1
limey Join Date: Oct 2008 Location: tampa Posts: 537	OZ Mito Modulars F/S I have a set of 17" Mto Modulars for sale. 5 Spoke with the studs, these are what Callaway put on there ZR-1's, I had these on my 415 ZR-1 for about 2 years and have since changed back to the OEM wheels. Have been completley refinished inside and out & now are ready to bolt on and have fun. Condition is near perfect, pictures will be posted up by Friday. $1500.00 + shipping for the set. Can ship intl. but will only ship airfreight,no surface shipping. This is a googled picture of the same style, but not the actual ones, just the same we are selling, use the picture to ref. what the style is. Last edited by GOLDCYLON; 11-21-2008 at 09:33 AM.

11-19-2008	#2
8upZR1 Join Date: Jun 2006 Location: Thunderbolt, Ga. Posts: 253	Re: OZ Mitto Mudlars F/S Are these 3 piece? Why did you go back to OEM? Any idea what kind of weiht difference there is between these and OEM?

11-19-2008	#3
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,165	Re: OZ Mitto Mudlars F/S I really like these wheels.. Wish I was in a position to buy them __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

11-19-2008	#5
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,704	Re: OZ Mitto Mudlars F/S Do they have the hidden perimeter bolts? Callaway had them made special I believe with hidden perimeter bolts, while the photo representation has the standard perimeter bolts. Are they ZR-1 sizes and offsets?

11-19-2008	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: OZ Mitto Modulars F/S FS title by OP corrected due to misspelling. Good luck with the sale. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

11-20-2008	#7
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: OZ Mitto Modulars F/S i am interested . could post or pm actuall pics of these . are they zr1 offsets ?

11-20-2008	#9
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: OZ Mitto Modulars F/S yes sir , they would look very nice on that i think .

11-20-2008	#10
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: OZ Mitto Modulars F/S No doubt, like it should. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V