|
06-22-2009
|
#11 |
 
Join Date: Feb 2006
Location: Iowa aka "one big cornfield"
Posts: 339
|
Re: Oil pan removal advice
The torque specs for the K-Braces is in the Service Manual Supplement for the LT5. It's on page 6A2A-18 , the second "tighten" heading. The front crossmember bolts 59 lb. ft. and the side member bolts 46 lb. ft.
Last edited by IowaZR-1; 06-22-2009 at 09:54 PM. |
|
|
|
06-22-2009
|
#12 |
 Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,537
|
Re: Oil pan removal advice
Thanks IowaZr-1, I found it with your reference. They don't call it a K-brace in GM terminology it's a front or rear crossmember brace. I even looked through that section and didn't spot it!
 Thanks for the extra input everyone. 
__________________
1991 #1516 Black/Black davidmkelly.com Author of fast-paced, sci-fi thrillers. |
|
|
|
|
06-22-2009
|
#13 |
|
Join Date: Jan 2009
Location: Houston, Tx.
Posts: 56
|
Re: Oil pan removal advice
I just tightened mine up.
 A 1/4" Snap On swivel socket was a great asset. Lee |
|
|
|
 |
|
|
Linear Mode
