ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-03-2009   #9
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,404
Default Re: Pulled the plenum, now what?

Quote:
Originally Posted by scholtmj View Post
Made some progress over the weekend. Pulled injectors, IH's, coil packs, alternator, compressor - ready to get to the starter and clean the V. I was surprised at the size of the secondary ports in the head. Compared with Jerry's gasket, they look slightly larger than 37mm.
For reference, engine drawing show secondary port dia to be 36.54mm dia with a 30deg chamfer, which would make the dia slightly larger at the mating surface. Injector Housing gaskets are made with 36.5mm port size for all ports, primary & secondary.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025