ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings
Reload this Page Update on my hi-miler Z project
Register FAQ Calendar Today's Posts Search

Reply
Page 13 of 33 « First 39101112 13 1415161723 Last »
 
Thread Tools Display Modes
Old 04-15-2011   #121
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by Jim Nolan View Post
The oil line to the oil cooler on my '92. If it is leaking good luck. Not hard to change but, there is no way to avoid a mess, no matter how neat you are.
Thanks Jim, my oil cooler lines are aftermarket braided steel lines, the OEM pieces were leaking but already replaced.

It appears that there's a leak from the oil temperature sender, which I had resealed with teflon tape a few months back - and apparently that's not the correct method. The FSM calls for Loctite 565 on these fittings, so I've ordered some of that and will also re-seal the oil cooler fittings with this correct material. The teflon tape does not appear to hold up well to hot oil.
VetteMed is offline   Reply With Quote
Old 04-15-2011   #122
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by sammy View Post
you might want to take a look at the oil filter housing and see if that might be your oil leak . i found that to be leaking on both my 90 and 92
Thanks Sammy, turns out you may be in the right neighborhood. Will update after things are re-sealed!
VetteMed is offline   Reply With Quote
Old 04-20-2011   #123
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by VetteMed View Post
Thanks Daryll! I will definitely give that a try if the problem persists.
Andrew any luck ? Daryll
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 05-01-2011   #124
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by GOLDCYLON View Post
Andrew any luck ? Daryll
Daryll, the last 2 times I drove the car, no codes... but yesterday I got a 3-inch long sheet metal screw through a rear tire, so that trip was cut short...
VetteMed is offline   Reply With Quote
Old 05-01-2011   #125
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by VetteMed View Post
Daryll, the last 2 times I drove the car, no codes... but yesterday I got a 3-inch long sheet metal screw through a rear tire, so that trip was cut short...
Ouch! I know how that feels. I've lost three 315's over six years to screws going thru the tire.....it just seems like it's the little things that come along every now & again to make our day an enjoyable one!
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
Old 05-01-2011   #126
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by tomtom72 View Post
Ouch! it just seems like it's the little things that come along every now & again to make our day an enjoyable one!

I hear that lost a few the same way. Those big tires have a big footprint. Let hope everything else is smooth sailing Andrew
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 05-04-2011   #127
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,167
Default Re: Update on my hi-miler Z project
Hey VetteMed,

how are you liking that Arc Audio Mini amp? I am looking to swap from my Arc 300.4 to the same one you have, mainly due to space constraints..

what are your opinions on that amp of yours?
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Shelby Series 1 - Wilwood Brakes
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 05-18-2011   #128
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project
Update:

I pulled the plenum once again, to finally get the A/C system up and running. When I pulled the rubber evap vacuum line off of the hard line, I got a handful of black granules. I shook the rubber line, and got a whole bunch more. Turns out the charcoal canister behind the rear wheel took a crap, and sent charcoal all through the line and presumably through the solenoid and into the intake. I'm hoping it didn't score up any cylinder walls too badly.
VetteMed is offline   Reply With Quote
Old 05-18-2011   #129
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Update on my hi-miler Z project
Quote:
Originally Posted by -=Jeff=- View Post
Hey VetteMed,

how are you liking that Arc Audio Mini amp? I am looking to swap from my Arc 300.4 to the same one you have, mainly due to space constraints..

what are your opinions on that amp of yours?
Jeff, now that I relocated it out of the storage compartment, it's doing well. it was getting entirely too warm in the compartment. However, I'm only 5'9" so I tend to keep my seat somewhat forward, leaving plenty of room for the built-in fan to cool the amp when mounted behind the driver's seat. It's very powerful and clean for its size.
VetteMed is offline   Reply With Quote
Old 05-18-2011   #130
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,167
Default Re: Update on my hi-miler Z project
Damn, I had a chance at 2 to replace my bigger Arcs and I passed, ah well, I can deal with what i have.. LOL
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Shelby Series 1 - Wilwood Brakes
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Reply
Page 13 of 33 « First 39101112 13 1415161723 Last »

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:12 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025