1990 Throttle hesistation

[scottfab]

Originally Posted by Schrade

I re-did the alternator fan with properly thinned paint, 3 coats. I'm pretty sure that the un-thinned paint sags on the underneath side would have made for a balance issue as it was...

This was the video for painting the housing.

So now it's ready for some di-electric grease on the connector screws, and re-assembly:

What a great idea to video the operation. I was just this morning writing to someone my intent to do this on my upper control arm bushing replacement project.
Your vid motivates me to do so even more !
Thanks