Tools to Carry in the ZR-1

[Dynomite]

Tools to Carry in the ZR1 behind the Seats.

Bottom Drivers Side.
Volt Meter, Resistance Meter and 1/4 inch Metric Tools..................1/4 Inch Metric Tools with some additional items noted


Second Layer Drivers Side.
Medium Channel Locks, Phillips and Flat Screw Driver, 1/4 Inch Socket Driver with 7mm Socket
(7mm socket used on all the interior Hush Panel and console screws and exterior ECM Chip Cover),
8mm Flex Open End Ratchet


Top Layer Drivers Side.
Fuel Pump Jumper and ALDL Code Reader/Eraser .........................Plug in to ALDL and Hold Any Button then turn key on to
.................................................. .................................................. .Read Associated Codes ALDL Fault Code Flasher/Eraser


Tools to Carry in the ZR-1

[Dynomite]

Bottom Passenger Side................................................... ................Bottom Top Box Passenger Side.
25 ft Nylon Tow Rope, Jumper Cables, Quart AMSOIL 10w-40.........Flex Head Ratchet Set (10mm, 12mm, 13mm, 14mm, 15mm)
.................................................. .................................................. ..(14mm Flex Head Ratchet used on Oil Pan Drain Plug)

Second Layer Top Box Passenger Side..........................................Top Layer Top Box Passenger Side.
3/8 inch Socket Wrench with 3/8 to 1/2 inch adapter .................long 3/8 inch drive 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
(Belt Tensioner), 3/8 inch drive Torx 40, Short 3/8 inch drive .....Allen for (SS Bolts of TB, Coolant Manifolds, Throttle Cables)
Wobble Extension, Short 3/8 inch drive 6mm Allen
(Cam Covers), Tire Repair Kit, Swivel Spark Plug Socket


Tire Pressure Gauge in the Center Console


Tools to Carry in the ZR-1

[Mystic ZR-1]

What? No hammer?

[Dynomite]

Originally Posted by Mystic ZR-1

What? No hammer?

No Hammer............
I have had everything apart more than once so no hammer needed to break anything loose

Did not included the Tow Adapter and Gorilla Lug Wrench which resides beside the Passenger seat

Tow Adapter Stored next to Passenger Seat......................Gorilla Lug Wrench


The Tow Adapter is made to engage the 1-1/4 inch square tubing of the frame support under the front of the ZR-1.

[Jagdpanzer]

Here is one of my favorites:

[Mystic ZR-1]

Break stuff loose?
Hammers are used for applying calibrated mechanical agitation....

[Gunny]

If you've ever attended one of Gordon's schools you might have had the opportunity to watch him demonstrate the proper use of a hammer ... I think it was the BFH model.



FWIW, he straightened a slightly bent rim ... didn't seem possible, but it worked

[Dynomite]

And if you screw up with the hammer (or the calibrated mechanical agitation) make sure you have the Triple A Card handy like Phil uses.
And.........you can always take the rims you screw up with a hammer and make great Air Hose Reels out of them........You Guys

Originally Posted by Gunny

If you've ever attended one of Gordon's schools you might have had the opportunity to watch him demonstrate the proper use of a hammer ... I think it was the BFH model.



FWIW, he straightened a slightly bent rim ... didn't seem possible, but it worked

Merry Christmas guys

[32valvesftw]

Merry Christmas to you Cliff, thanks for all you do for the forum.

[Mystic ZR-1]

There's nothing on a Corvette that Gordon can't fix!!!