About White Racing Products.

[Flyman 27]

Originally Posted by Z51JEFF

Hi Kenji,what are you looking for? If it would be helpful somebody on this side can help get the part and then forward it to you with the exception of WHITE RACING PRODUCTS. I don't do business with Kurt White for obvious reasons.

I agree, there are a lot of helpful people here on the Forum, post a list of what you need an I am positive you will get lots of help here.

[PhillipsLT5]

http://www.jerrysgaskets.com/

[mgbrv8]

Speaking personally I avoid that company from past experience, that is all

Dave

[RussMcB]

I just did a Google Search on "White Racing Products". Lots of bad experiences pop up on the first page of hits.

Admittedly, some are old (2003, 2004), and some people have been happy with what they've bought.

Other people mentioned BBB complaints.

My hunch is he has/had high quality parts/knowledge in the past, but the service is so sporadic, and awful at times, why risk it (if you can get what you need from someone with a good reputation)?

[Kenji]

Originally Posted by RussMcB

Kenji,

Thanks for sharing.

I had a similar experience a year ago. White Racing's website had the part I needed, I placed the order but it didn't arrive after a reasonable time (and I'm only a US state away from them). It took many attempts to contact them but was able to get a refund. It was not a pleasant experience and I lost a lot of time.

Hi,RussMcB.

Thank you for your reply.
You also had trouble with the acquisition of parts of ZR.
A few years ago when I ordered parts for White Racing Products, the parts arrived safely to me. But this time I got a very disappointing result.

[Kenji]

Originally Posted by G8nightman

Why don't you try calling him? his site is not up to date on a lot of parts listed.

Hi,G8nightman.

Thank you for your reply.
Why am I not contacted by phone? My English conversation skills are low, so for me it is difficult to communicate by phone.
I attempted to contact the auto parts supplier to Japan for contact with White Racing Products.
After all he also did not get in touch with White Racing Products.

[Kenji]

Originally Posted by WARP TEN

Or better yet contact Jerry at Jerry's gaskets--he has lots of parts for LT5s or Mark Haibeck who should be able to help on some things. If they don't have things you need they can probably tell you who has them. Or alternatively, post here on the forum what you need and maybe someone will come up with them. Good luck with your efforts--the '95 is a great car that deserves to run well.--Bob

Hi,Bob.Thank you for your reply.
Yes!I know Jerry's Gaskets,I bought a lot of parts from him for this repair.
However, there were parts not listed on the Web-Site of Jerry's Gaskets.
（for example,camshaft position sensor,and secondary vacuum hose kit
)
So I ordered parts for White Racing Products.

Jerry's Gaskets, I trust very much. I am grateful to him for his prompt and courteous correspondence.

[Kenji]

Originally Posted by lfalzarano

White Racing Products
13329 W. Hillsborough Ave
Tampa FL 33635
(813) 854-4203

sales@whiteracingproducts.com
Use this simple form to reach us:

During regular business hours it's best to reach us by tel. However for after hours, use this contact us page. Our staff are able to check emails during extended business hours and occasionally on weekends.

Hours of operation:

M-F 9am - 6pm
Sat 9am - 1pm
Sun Closed (We can respond though via email)
We respond by email within 24 hours, most times sooner.


Sent from my iPhone using ZR-1 Net Registry

Hi,lfalzarano.

Thank you for your reply.
I not only contacted the e-mail address many times, but also mailed Mr. Kurt White, but there was no reply.

[Kenji]

Originally Posted by Z51JEFF

Hi Kenji,what are you looking for? If it would be helpful somebody on this side can help get the part and then forward it to you with the exception of WHITE RACING PRODUCTS. I don't do business with Kurt White for obvious reasons.

Hi,Z51JEFF

Thank you for your reply.
During the repair this time, my mechanic dropped LT 5 from ZR.
And he changed many Gaskets, Seal, various sensors, Fuel Injector an more...
and painted the engine.
However, camshaft-sensor and Vacuum hose rebuild kit could not be obtained. The mechanics decided to use parts that I used to date for camshaft-sensor. Vacuum Hose also decided to remodel the parts so far and use it.
I would like to use new parts if possible. Because these parts are parts that have been operated while being exposed to high temperature conditions for a long time, I judged that it would be better to replace them at this time.

And I think that I want my son to keep on riding my ZR-1.

[Kenji]

Originally Posted by Flyman 27

I agree, there are a lot of helpful people here on the Forum, post a list of what you need an I am positive you will get lots of help here.

Hi,Flyman.

Thank you for your reply.
I am pleased with your advice in this forum.