Crankshaft, 405 or 427 cu in - ZR-1 Net Registry Forums

alexco · 11-17-2019

Does anyone know if anyone makes the above crankshafts and the rods? Thanks.

A26B · 11-17-2019

Quote:

Originally Posted by alexco

Does anyone know if anyone makes the above crankshafts and the rods? Thanks.

We use Moldex to make crankshafts and Oliver for rods. You didn't ask but JE Pistons for, yep, you guessed it, pistons.

Jagdpanzer · 11-17-2019

You can get a 4” stroke billet crankshaft from either Muldex or Bryant.

https://moldexcrankshaft.com

https://bryantracing.com

You use small block Chevy rods available from Oliver, Crower, Manley and others.

For my 427 I used a 4” stroke Bryant crank, 6” SBC Crower Maxilite 6” rods, and 4.125” pistons from Diamond.

Sent from my iPhone using ZR-1 Net Registry

11-17-2019	#1
alexco Join Date: Nov 2016 Location: Gilroy, CA Posts: 22	Crankshaft, 405 or 427 cu in Does anyone know if anyone makes the above crankshafts and the rods? Thanks.

11-17-2019	#3
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,651	Re: Crankshaft, 405 or 427 cu in You can get a 4” stroke billet crankshaft from either Muldex or Bryant. https://moldexcrankshaft.com https://bryantracing.com You use small block Chevy rods available from Oliver, Crower, Manley and others. For my 427 I used a 4” stroke Bryant crank, 6” SBC Crower Maxilite 6” rods, and 4.125” pistons from Diamond. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake