help with #'s - ZR-1 Net Registry Forums

hihok9 · 09-29-2005

Trying to make positive ID on year of my motor:

On drivers side rear is MM1220CZA376
On pass rear DF10122145 cast in case

Any help is appreciated, if any another #'s help, let me know. Thanks
Hiho

zr1mom · 09-29-2005

Check it out here: http://www.zr1netregistry.com/ZR1_vin.htm

hihok9 · 09-30-2005

Checked there but my #'s don't seem to match that formula. I did find the partial VIN on vertical part of block by flywheel on pass side
1K5800059
what year does the "K" designate? Also my black book does not list the CZA stamped on drivers side. Again, any help is appreciated, I am buying parts so the year is important. Thanks
Hiho

yellowz · 09-30-2005

hey bruce

what i can tell ya may not be to much but looking at the front of the motor so the right side would be on your same side look at the timing cover if the bottom is square its a late 93/95,otherwise its an earlier one.sorry i cant tell ya any morwe than that maybe try gordon or call rich zizza in connecticut hes a bloomington judge who is in charge of the lmsi which covers the zr1.

later
peter

09-29-2005	#1
hihok9 Join Date: Jul 2005 Posts: 49	help with #'s Trying to make positive ID on year of my motor: On drivers side rear is MM1220CZA376 On pass rear DF10122145 cast in case Any help is appreciated, if any another #'s help, let me know. Thanks Hiho

09-29-2005	#2
zr1mom Join Date: Dec 2003 Location: New Hampshire Posts: 421	Re: help with #'s Check it out here: http://www.zr1netregistry.com/ZR1_vin.htm __________________ ZR-1 Mom Founder ZR-1 Net Registry Founder ZR-1 Net NCM Lifetime Member

09-30-2005	#3
hihok9 Join Date: Jul 2005 Posts: 49	Re: help with #'s Checked there but my #'s don't seem to match that formula. I did find the partial VIN on vertical part of block by flywheel on pass side 1K5800059 what year does the "K" designate? Also my black book does not list the CZA stamped on drivers side. Again, any help is appreciated, I am buying parts so the year is important. Thanks Hiho

09-30-2005	#4
yellowz Join Date: Aug 2005 Posts: 54	Re: help with #'s hey bruce what i can tell ya may not be to much but looking at the front of the motor so the right side would be on your same side look at the timing cover if the bottom is square its a late 93/95,otherwise its an earlier one.sorry i cant tell ya any morwe than that maybe try gordon or call rich zizza in connecticut hes a bloomington judge who is in charge of the lmsi which covers the zr1. later peter